Adding a 2nd piece of music to the sheet.
 

The first piece takes up a third of the sheet and I have been trying to place another piece below it, with no sucess. Can you help?:confused: John

Re: Adding a 2nd piece of music to the sheet.
 

Hi, John:

Composer isn't really intended to place multiple pieces in one file like that.

One work-around that comes to mind is to print off your first piece that ends one third of the page down, then set up the printed page of your second piece to start half-way down, by adjusting the top margin.

Then feed the last page of the first piece back into the printer and print the second piece. You should be able to print the second piece onto the last page of the first.

Many years ago, when I did my first full score for one of my musicals, I did it in a (DOS 3.1, that is, long before Windows) version of Personal Composer (not Notation Composer) as one long file that had each piece following successively. I had one heck of a time extracting each piece later and never made that mistake again.

Anyway, if you play with the margins of your print setup, you should be able to set it up to print part pages.

Good luck.

David

Re: Adding a 2nd piece of music to the sheet.
 

Hi guys,

Actually you can have multiple songs within a single file, but you'll need to do the formatting manually (eg. split the song at the appropriate measure(s)), as well as move the measures around to make space for the title for the second song and add in a Free Text title for that song.

I have done this before for a "sing along" booklet I was putting together, and only did it because I needed to print multiple copies of the same thing and the time and space saved was worth the extra effort.

ttfn,
Sherry