|
|
Questions or problems Have a question or problem about something you can't find in the Help/Users Guide? Ask it here! |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Slurs over Page Change
This is a problem that I have experienced with Composer over the years. I have two different PCs that show the same problem - on Version 4 and the Beta.
On this score, when I switch from Full Screen to Page mode, the slur in the Alto part misbehaves (see the three screen shots I have included). In screen shot #1 in Full Screen mode, the slur in measures 26 and 27 in the Alto part appears normal. In screen shot #2 and #3, the Alto slur drops down into measure 26. I have experienced similar problems over my years with Composer, but this is the first time that I haven't been able to tweak my way out of the problem by moving the left anchor up/down/left/right - similar failures with the other three anchors. Cynthia and I always play these songs on paper from the full score, so it doesn't help to print separate parts. Grrr - I have three screen shots for this report, but I can't get them "resized" to satisfy the upload. Ralph Rayner |
#2
|
|||
|
|||
Re: Slurs over Page Change
Hi, Ralph:
A hearty concur from me. It's been on my wish list for quite a few versions, now. Maybe in the next one. David |
#3
|
||||
|
||||
Re: Slurs over Page Change
Hi guys,
I have upped the limits for picture files for the forum. I'd really like to see the screen shots because when I opened up the .not file and looked at it a few different ways I'm not seeing any shifting slurs. I'm probably not holding my mouth the right way Please do upload the screen shots (you can use Paint, which is on all Windows systems to annotate and crop or resize images) so I can more clearly see the issue. Thanks, Sherry
__________________
Music is to the soul like water is to green growing things. |
#4
|
|||
|
|||
Re: Slurs over Page Change
My dear, sweet wife Cynthia, helped me "remember" how to resize jpgs. Here are the three screenshots - resized for this forum:
Screenshot 2023-07-28 #1.jpg shows the score in full screen mode - measures 26 - 27 appear cleanly; Screenshot 2023-07-28 #2.jpg shows the score in page mode - the area of the problem is in measure 26 with the offending slur in the alto part, and; Screenshot 2023-07-28 #3.jpg again shows the score in page mode - only measure 27 is shown (not much value). Ralph Rayner |
#5
|
||||
|
||||
Re: Slurs over Page Change
Hi Ralph,
Thanks for the screenshot. Unfortunately for debugging I am not able to reproduce that issue on my own setup. Here's my screen shot in Page view: sac-Ralph-slurs_ok_on_Page_view-sm.jpg I'm not sure why it's behaving for me but not on your setup. David, do you (or anyone else) see this issue on your set up? Also a quick tip for tie placement:
Thanks! Sherry
__________________
Music is to the soul like water is to green growing things. |
#6
|
|||
|
|||
Re: Slurs over Page Change
Hi, Sherri, Ralph:
Here are some screenshots from one of my compositions, showing the behaviour in question. 1. A slur over a page-break in Page View. This was the best I could get it. 2. The same slur after the page-break. Note that the right hand (after the page) is usually 'normal'. 3. The same slur as it appears in Scroll View with the slur selected. Note the distortion required to get the slur to appear even as in screen-shot 1. 4. The same slur moved to appear 'normal' in Scroll View with the slur selected. 5. The same 'normalized' slur as it then appears in Page View. 6. The right hand end of the same slur after the page-break. I've also attached the .not file of the composition so you can try it out. The slur in question is at bar 31-32. This issue goes back right to the beginning. I only have versions going back to 2010 on my hard drive, but I know it goes back at least that far. |
#7
|
|||
|
|||
Re: Slurs over Page Change
The 6th pic and the .not file.
|
#8
|
|||
|
|||
Re: Slurs over Page Change
Sherry & David,
I don't know if this is a significant additional symptom, but when I left-click the left-most anchor in my (measure 26) example, the anchors disappears completely and reappear wherever the cursor is when I release, as it should, but it shouldn't be a blind drop. I do not see the same behavior in David's sample. Ralph |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving last staves to next page | panworks | Questions or problems | 3 | 06-21-2017 12:55 PM |
Moving last staff to next page | panworks | Questions or problems | 0 | 06-20-2017 12:58 AM |
Page layout does not adjust to font size change | Tim Mariott | Questions or problems | 2 | 07-01-2014 02:28 PM |
Problem in changing page numbers | dj | Questions or problems | 4 | 11-01-2012 10:15 AM |