View Single Post
  #5  
Old 10-19-2010, 08:41 AM
NotationUser NotationUser is offline
Senior User
 
Join Date: Oct 2010
Location: Germany
Posts: 101
Default Re: Recording/Editing channel pressure (aftertouch)

So just to make sure, the midi channel the hardware is sending the CC does not matter and the recording is done on the midi channel assigned to the selected staff? ...would make sense as this is like channels are treated for notes recording.

Maybe the controller selection could be simplified by just moving the control on the midi device alternatively to the list to choose from.

BTW, I noted that I can only choose controller numbers 1..31 and 64..97. I know that cc0/cc32 are used for bank select and are not useful to be recorded dynamically. I also know that the first 32 cc numbers can be "paired" with the ones offset by 32 to create higher resolution values up to 14bit - so usually not presenting these probably confirm midi file standard. I am not so sure about CCs above 97, are these specified the same? ...or not at all by some midi standard? ...and needless to say that some devices do use CCs differently, so what about these? ...it's just a question, not really a request for anything.

I understand that recording to multiple staffs is another story. Especially it would need some clever dynamic mapping in Notation Software as it's impossible to create controller maps for any channels combination.

Probably adding some more "working" expression symbols is a feature I'd prefer to have first...
__________________
...and keep on jamming... :p
Reply With Quote