[mgj32]

Hi Sherry,
The 'Christmas' Symphony done and the Ned/Nelly aria nearly so, I have installed Maple Midi. I am going to need more than 16 channels, no matter how many sound changes I could do in the Sax/Violin Concerto (yes, that is started.)
When I open select port in Composer, on the left (Input ports) I find Maple Midi 1,2,3,4, and SB Audigy Midi IO.
On the right (Output ports) I find Mapel Midi 1,2,3,4, plus MS Wavetable, SB Audigy Midi IO, Audigy Synth A, and Audigy Synth B.
All the Maple Midi ports were checked, both sides, as was the SB Audigy Midi IO and Synth A.
I tested all and the scale plays for all the Maple ports AS LONG AS both sides are checked.
Before I continue, I am wondering what should be checked on each side and which not.
Synthfont IO Ports, on the left side, gives me the four Maple ports and SB Audigy 2 ZS IO. Apparently I can select 2 of them. I have checked Maple 1 and SB Audigy IO. Maple adds >slot 0..15, while SB Audigy IO adds >slot 16.. 32.
That is as far as I've got. I wonder if it is anywhere near correct.
all best,
mgj