Notation & Cantabile
Hi Sherry,
I installed LoopBe1, in order to work, the two software Cantabile & Notation, but I do not know how to configure them, as I said I would be able to use the sounds of the VST loaded on Cantabile and make them play in place of the Microsoft GS Wavetable SW Synth, which uses Notation Default, Could you explain how to do the configuration in order to achieve the desired result? what are the ports (In - Out) that I use for their programs? I also have to change the settings (music player Midi) Windows ie replace: Microsoft GS Wavetable SW With LoopBe Internal Midi? I hope you can help me to make everything work, Thanks in advance, Franco |
Re: Notation & Cantabile
2 Attachment(s)
Hi Franco,
I have not personally used Cantabile, but here are the general rules for using a host for your instruments via a virtual MIDI cable: 1. In Notation Musician/Composer, go to Setup/MIDI Devices Configuration/Port/Select Ports and make sure that the cable(s) are only selected as OUTPUT ports: Attachment 1204 2. In your host (eg. Cantabile, SynthFont, whatever...) go to the similar setting for "Ports", and do the opposite. In other words, only have "In" or "Input" from the MIDI cable. Unselect the "out" or "output" for all virtual MIDI cables. If you do not do this, then there is a possibility of setting up an "infinite loop" which can slow your computer to a crawl and you can't do anything. LoopBe30 has a feature that detects such loops and shuts down the loop so it doesn't cripple your computer. I'm not sure about others. 3. For some hosts (eg. the Garritan Aria host) you will need to match the channel number in Musician/Composer's Staff Setup for each instrument with the channel number that is assigned in the host for the instrument you want to use: Attachment 1205 Hope this gets you going! Sherry |
Re: Notation & Cantabile
Hi Sherry,
Thank you for valuable suggestions, later I take a test, then let you know how it went ..... Have a nice day,:) Franco |
Re: Notation & Cantabile
Hi Franco,
Also, make sure the Device name matches for the instruments/staves, too :) ttfn, Sherry |
All times are GMT. The time now is 02:52 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Notation Software Germany GmbH www.notation.com/Imprint.php