PDA

View Full Version : Notation & Cantabile


Frankomposer
05-03-2014, 12:35 PM
Hi Sherry,
I installed LoopBe1, in order to work, the two software Cantabile & Notation, but I do not know how to configure them, as I said I would be able to use the sounds of the VST loaded on Cantabile and make them play in place of the Microsoft GS Wavetable SW Synth, which uses Notation Default,
Could you explain how to do the configuration in order to achieve the desired result?
what are the ports (In - Out) that I use for their programs?
I also have to change the settings (music player Midi) Windows
ie replace: Microsoft GS Wavetable SW
With LoopBe Internal Midi?
I hope you can help me to make everything work,
Thanks in advance,
Franco

Sherry C
05-03-2014, 02:28 PM
Hi Franco,

I have not personally used Cantabile, but here are the general rules for using a host for your instruments via a virtual MIDI cable:

1. In Notation Musician/Composer, go to Setup/MIDI Devices Configuration/Port/Select Ports and make sure that the cable(s) are only selected as OUTPUT ports:

1204

2. In your host (eg. Cantabile, SynthFont, whatever...) go to the similar setting for "Ports", and do the opposite. In other words, only have "In" or "Input" from the MIDI cable. Unselect the "out" or "output" for all virtual MIDI cables.
If you do not do this, then there is a possibility of setting up an "infinite loop" which can slow your computer to a crawl and you can't do anything.
LoopBe30 has a feature that detects such loops and shuts down the loop so it doesn't cripple your computer. I'm not sure about others.

3. For some hosts (eg. the Garritan Aria host) you will need to match the channel number in Musician/Composer's Staff Setup for each instrument with the channel number that is assigned in the host for the instrument you want to use:

1205



Hope this gets you going!
Sherry

Frankomposer
05-04-2014, 01:09 PM
Hi Sherry,
Thank you for valuable suggestions,
later I take a test, then let you know how it went .....
Have a nice day,:)
Franco

Sherry C
05-05-2014, 04:31 AM
Hi Franco,

Also, make sure the Device name matches for the instruments/staves, too :)

ttfn,
Sherry